Wire rope displacement sensor Cable displacement sensor！

Cable displacement sensor / encoder (also called wire rope displacement sensor) is a linear displacement sensor integrated in the structure of compact, fully combines the advantages of linear and angular displacement sensor displacement sensor becomes a compact, measuring stroke length, mounting space small size, high-precision measurement of the sensor is excellent. The series has a lot of options, ranging from travel from 200mm to 20000mm with analog current 4 ~ 20ma, analog voltage of 0 to 5 V or 0 to 10 volts and pulse A, B, Z-phase digital output to meet the large travel , a variety of high-precision signal requirements for the majority of customers use.

Main Features Accessories

Pull rope displacement sensor displacement sensor is divided into two parts, machinery and electronics sections, the key is an electronic part is above the encoder, select the encoder is very important, probably divided into a encoder: domestic and imported II. The encoder is divided into: single-turn, multi-turn. three. BEN absolute encoder divided according to the principle: magnetic absolute encoder, optical encoder that value. four. Encoder outlet is divided into: side of the outlet, after a. Fives. Absolute encoder shaft is divided into:. 6MM, 8MM, 10MM, 12MM, 14MM, 25MM VI. BEN encoder is divided into: solid shaft, blind holes, through holes. Seven. Absolute encoders are divided into protection:. IP54-68 VIII. BEN encoder installation is divided into: clamping flange, servo flange, intensified with synchro flange, blind hole (spring, hold), through hole (spring, key pin) IX. BEN absolute encoder accuracy is divided into: Single turn and multiturn precision accuracy, precision add up to the total, which is the usual number of bits (conventional lap 10, 12, 13, 16, 24 is a multi-turn, 25, for 30, 32 ....). ten. BEN absolute encoder protocol Baud rate: 4800 ~, 19200,115200bit / s, the default is 9600bit / s. Refresh period of about 1.5ms eleven absolute encoder output options: SSI, 4-20MA, 0-10V, profibus-dp, DEVicenet, parallel, binary code ,, BiSS, ISI, CANopen, Endat and Hiperface twelve .BEN turn encoder common specifications: BE1322SM58-N011, BESM58-011, BE122SM58, BE1822SM58, BE420SM58 etc.

Previous：rotary encoder frequency response and the highest maximum speed
Next：Rope sensor working principle and common parameters: