Mechanical Installation instructions of hollow shaft type and hollow shaft cover pinch built shrapne！

(1) pressed type hollow shaft cover
1. The shrapnel mounted on the encoder and tighten the screw
2. The encoder shaft gently into the output shaft of the client, the installation process is prohibited by means of foreign object struck encoder
3. Client output shaft is stationary, rotary encoder shaft rotation two weeks, the mounting holes will align shrapnel shrapnel fixed
4. The encoder mounting screws hold the locking ring
5. The installation is complete
Encoder client connection requirements:
1. Client output shaft is recommended h6 tolerance, surface roughness of less than equal to 0.8
2. Misalignment client output shaft rotation center is less than 0.2mm
NOTE: The encoder is a precision instrument, the installation no percussion / collision!

(2) The hollow shaft built shrapnel connection type
1. The encoder shaft gently into the output shaft of the client, the installation process is prohibited by means of foreign object struck encoder
2. Client output shaft is stationary, rotary encoder shaft rotation two weeks, the mounting holes will align shrapnel shrapnel fixed
3. The encoder mounting screws hold the locking ring
4. The installation is complete
Encoder client connection requirements:
1. Client output shaft is recommended h6 tolerance, surface roughness of less than equal to 0.8
2. Misalignment client output shaft rotation center is less than 0.2mm
NOTE: The encoder is a precision instrument, the installation no percussion / collision!

Previous：Incremental Encoder High Resolution Optical Sensor Encoder
Next：SCS30T 500 PPR Optical Encoder Hollow Shaft Incremental Encoder